Nine calculators for the numbers a practice manager actually gets asked about: denial rate, clean claim rate, first-pass resolution, net collection rate, days in A/R, cost to collect, what a billing company’s fee really costs against per-claim or in-house billing, the timely filing deadline for a date of service, and what no-shows cost a year. Every calculation runs in your browser. Nothing you type is stored, logged, or sent to us.
Each result is judged against the targets in our medical billing metrics guide, which explains how each number is defined and what to do when it is off. The targets are commonly cited practice benchmarks, not guarantees: specialty, payer mix, and fee schedule move the right number for your practice. Use a consistent period for every input, ideally the trailing twelve months.
Claim Quality
Denial Rate
Claims denied divided by claims adjudicated in the same period. Target: under 5%.
How to read it: a denial rate is a map of where payer rules and your front end disagree. The fix is almost never “appeal more” alone; it is the registration, eligibility, and coding edits upstream, plus an appeal process for what still gets through. See how to fight claim denials under the 2026 rules.
Clean Claim Rate
Claims accepted on first submission divided by claims submitted. Target: above 95%.
How to read it: this is a front-end accuracy score. Rejections at the clearinghouse or the payer’s intake are registration, eligibility, and edit problems that should be caught before a claim leaves. The claims management guide covers the claim lifecycle and where claims fail.
First-Pass Resolution Rate
Claims paid without rework divided by claims submitted. Target: above 90%.
How to read it: the gap between the clean claim rate and the first-pass resolution rate is the volume of claims that looked fine and still denied. That gap is the workload your denial process carries every month, and the metrics guide explains why both numbers are needed.
Collections and A/R
Net Collection Rate
Payments divided by charges minus contractual adjustments. Target: above 95 to 96%.
How to read it: this is the single best measure of how much of what you are owed you actually collect. Every point below 100 is money contractually due that was denied and written off, abandoned as a patient balance, or lost to a missed filing deadline. Use a trailing twelve-month window so payments and charges line up.
Days in A/R and A/R Over 90 Days
Total A/R divided by average daily charges (annual charges divided by 365). Target: under 40 days; 30 to 35 is strong. A/R over 90 days: under 15 to 20% of total.
How to read it: days in A/R says how long it takes to get paid; the over-90 share says how much of that money is drifting toward a write-off. Both move with charge lag, denial follow-up, and patient balances, which the metrics guide walks through metric by metric.
Cost of Billing
Cost to Collect
Total billing cost divided by payments collected. Commonly cited range for practices: roughly 3 to 5%.
How to read it: cost to collect is only meaningful next to the net collection rate. A billing operation that costs 2% and collects 88% of what is owed is far more expensive than one that costs 6% and collects 97%.
Billing Fee Comparison: Percentage vs Per-Claim vs In-House
Convert each pricing model to an annual cost and find the percentage at which they cost the same. Only the first two fields are required.
How to read it: the annual numbers put the three models on one line, but the line hides the thing that decides the outcome, which is what each option does about denials and aging A/R. Our guide to what medical billing companies charge explains the 4 to 10% range and the questions that matter more than the rate.
Deadlines and Front Desk
Timely Filing Deadline
Pick the payer limit and the date of service to get the last day the claim can be received.
How to read it: Medicare denies a fee-for-service claim received more than one calendar year after the date of service, under section 6404 of the Affordable Care Act and 42 CFR 424.44, and the exceptions are narrow. New York Medicaid requires claims within 90 days of the date of service under 18 NYCRR 540.6, with delay reason codes for the limited exceptions eMedNY accepts. Commercial limits are contractual and commonly run from 90 days to a year, with different windows for corrected claims and secondaries. The deadline this tool shows is the latest date; a claim filed near it has no room for a rejection and a resubmission.
No-Show Cost
What missed appointments cost in a year, and what a reduction would recover. The reduction field is yours to fill; there is no assumed number.
How to read it: the annual figure is the revenue that walked out the door, before the cost of the idle room and staff. Measure your own no-show rate for a month before buying a reminder system, then measure it again after; the recovered number should come from your schedule, not a brochure.
Benchmarks Used Here
The targets below are the ones in our medical billing metrics and KPIs guide, which also gives the formula, what each number tells you, and what to do when it is off.
| Metric | How to calculate | Commonly cited target |
|---|---|---|
| Denial rate | Claims denied ÷ claims adjudicated | Under 5% |
| Clean claim rate | Claims accepted on first submission ÷ claims submitted | Above 95% |
| First-pass resolution rate | Claims paid without rework ÷ claims submitted | Above 90% |
| Net collection rate | Payments ÷ (charges − contractual adjustments) | Above 95–96% |
| Days in A/R | Total A/R ÷ (annual charges ÷ 365) | Under 40; 30–35 is strong |
| A/R over 90 days | A/R older than 90 days ÷ total A/R | Under 15–20% |
| Cost to collect | Billing cost ÷ payments collected | Roughly 3–5% for practices |
Filing limits: CMS, Medicare Claims Processing Manual, Chapter 1, section 70, Time Limitations for Filing Part A and Part B Claims (PDF), implementing section 6404 of the Affordable Care Act; 42 CFR 424.44, Time limits for filing claims; 18 NYCRR 540.6, Billing (New York State Department of Health regulations); eMedNY, Information for All Providers: General Billing and Guide to Timely Billing. Benchmarks: our metrics guide.
Frequently Asked Questions
Are these medical billing calculators free, and is my data stored?
Yes, they are free, and nothing you enter is stored or sent anywhere. Every calculation runs in your browser with plain JavaScript; there is no account, no form submission, and no upload. Reloading the page clears the fields.
Where do the benchmark targets come from?
From the benchmark table in our medical billing metrics guide: denial rate under 5%, clean claim rate above 95%, first-pass resolution above 90%, net collection rate above 95 to 96%, days in A/R under 40 with 30 to 35 strong, A/R over 90 days under 15 to 20%, and cost to collect roughly 3 to 5%. They are commonly cited practice targets, not guarantees; specialty, payer mix, and fee schedule move the right number for a given practice.
What is the difference between denial rate and clean claim rate?
Clean claim rate measures how many claims are accepted on first submission, before adjudication. Denial rate measures how many adjudicated claims the payer denied. A claim can be accepted by the clearinghouse and the payer’s front end and still be denied, so a practice can have a 97% clean claim rate and a 9% denial rate at the same time. First-pass resolution rate, claims paid without any rework, is the strictest of the three.
What is the Medicare timely filing limit?
One calendar year from the date of service. Under section 6404 of the Affordable Care Act and 42 CFR 424.44, Medicare denies a fee-for-service claim received more than 12 months after the date the service was furnished, and the exceptions are narrow. New York Medicaid requires claims within 90 days of the date of service under 18 NYCRR 540.6, with delay reason codes for the limited exceptions. Commercial limits are set by contract and commonly run from 90 days to a year.
How do I compare a percentage-of-collections fee with per-claim pricing or in-house billing?
Convert each option to an annual cost. A percentage fee is monthly collections times twelve times the rate. Per-claim pricing is the fee times claims per month times twelve. In-house billing is salary plus benefits plus software and clearinghouse costs. The fee comparison calculator shows all three and the percentage at which they cost the same. Then compare what each option does about denials and aging A/R, because a cheaper biller who does not appeal costs more in write-offs than the fee difference.
Want the Numbers Read by Someone Who Works Them Every Day?
Every CCL Billing engagement starts with a free baseline review of your current billing performance: the same metrics, pulled from your reports, with an estimate of what is going uncollected. Our medical billing services and revenue cycle management are priced on collections, so we only earn when you do.
Contact Us
Get in Touch
We're here to help you streamline your medical billing processes and boost your practice's efficiency. Simply fill out the form below, and one of our dedicated experts will reach out to discuss how we can support your practice and take your billing to the next level.
Give us a call
Office location
99 Washington Avenue, Suite 1008, Albany, New York, 12210